Siemens dishwashers
Freestanding, semi- and fully integrated models.
Common repairs- Filters & drain
- Aquastop
- Flow-through heater
We repair Siemens dishwashers at your home — Freestanding, semi- and fully integrated models. Call now and an independent technician comes to you, usually the same day.
Independent technicians, at your home, 24 hours a day
AED 100 inspection and fixing fee · parts extra, only with your approval · prices exclude 5% VAT
At a glance
Don’t wait. Schedule a priority inspection today.
AED 100 inspection and fixing fee · parts only with your approval · prices exclude 5% VAT
Prefer to call? +971 58 869 5211
Independent service provider. Unitech Maintenance is an independent repair company. We are not an authorised service agent of, and are not affiliated with or endorsed by, Siemens. The name “Siemens” and other manufacturer names on this page are trademarks of their respective owners and are used only to identify the equipment we repair.
Talk to a technician now
+971 58 869 5211Tell us the model and what your Siemens dishwasher is doing. One AED 100 fee covers the inspection and the fixing; parts only with your approval.
Every fault is tested and confirmed before any part is replaced, and you approve the price before work starts.
Freestanding, semi- and fully integrated models.
Common repairsWhat owners tell us when they call about a dishwasher. Any of them, on any Siemens model, starts with a test at your home.
These are codes we are called out for on Siemens appliances in the UAE. A code narrows the search — it does not name the broken part on its own, which is why every job starts with a test rather than a guess.
What it means
The anti-flood protection has tripped: water has collected in the base tray under the machine and a float switch has shut the cycle down to stop a leak spreading.
Usually
A genuine internal leak — a perished door seal, a split fill or drain hose, a cracked sump or a leaking spray-arm feed. Water sitting in the base must be cleared and the leak found before the machine will run normally again. Siemens advises closing the water tap and switching the appliance off rather than attempting a home fix, since it is a water-and-electricity hazard.
What it means
Waste water is not leaving the machine, so the wash stops with dirty water standing in the tub.
Usually
A clogged filter assembly, a drain pump cover that has not been seated and locked properly, debris jamming the pump impeller, or a kinked/blocked waste hose or sealed sink siphon connection. On older machines the internal drain pipework can silt up with grease and food residue and need flushing.
What it means
The dishwasher has detected that its filters are clogged with food debris and grease. The first thing you notice is poor wash results; on some models the machine also runs an automatic filter-clean routine. Of every code on this page, this is the one you can most often clear yourself.
Usually
The coarse and fine filters have loaded up with food debris and grease. This is the one code on the list a customer can usually clear themselves — lift out the filter stack, wash it under a hot tap with a brush, refit it and lock it. If it returns quickly, the machine is being loaded with too much solid food residue or the drain is partially restricted.
What it means
A fault in the water heating circuit — the machine cannot bring the wash water up to temperature.
Usually
Typically a failed flow-through heater (the heating element built into the circulation pump) or its supply/control circuit on the main board. Symptom the customer notices first is dishes coming out cold, greasy and with detergent residue still in the dispenser. Not a DIY repair — it is a mains-voltage component inside the sump.
Seeing one of these codes? Call with the code and the model number from the rating plate, and we will tell you the likely cause and what happens next.
Call now · +971 58 869 5211Siemens keys spare parts to the E-Nr. on the rating plate, and the iQ tier alone is not enough to identify the right component.
We confirm the exact part, its availability and the expected wait with you before the repair is approved. Where an original part is discontinued or slow to source, we say so and tell you what the alternative is before anything is fitted — including whether it is an OEM part or a high-grade equivalent.
Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval.
All prices exclude 5% VAT. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing.
The same method on every Siemens dishwasher — test first, agree any parts, repair, then the warranty.
Call or WhatsApp with the model number and what the appliance is doing. An error code helps.
The technician tests and confirms the fault before anything is replaced. No guessing.
The AED 100 fee covers the inspection and the fixing. Any part is priced first and fitted only with your approval.
We run the appliance in front of you, then the repair carries a 90-day warranty.
Straight answers to what people ask us about Siemens dishwashers.
Please do not just reset it. E15 means water has collected in the base tray under the dishwasher and the built-in flood protection has shut it down — there is a real leak somewhere inside. Close the water tap feeding the machine, switch it off at the socket, and call us. Resetting it repeatedly without finding the leak is how a small drip turns into damaged kitchen cabinets, and on an under-counter machine you often cannot see the water until the floor is wet.
If detergent is left undissolved in the dispenser and the dishes come out cold and greasy, the machine is most likely not heating the water — on Siemens machines that often surfaces as an E09 heating fault, pointing to the flow-through heater or its control circuit. Before assuming the worst, pull out the filter stack in the base and clean it, since a clogged filter (often shown as E22) restricts circulation and produces similar results. If cleaning the filters does not fix it, it needs a technician — the heater is a mains-voltage part inside the sump and is not a home repair.
What the 90-day cover includes, and what it does not, is set out in our warranty terms.
The ones we are called out for most are E15, E24 and E09, and each is explained on this page. A code narrows the search but does not name the broken part on its own, so every job starts with a test rather than a guess.
Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing. All prices exclude 5% VAT.
If it is still inside Siemens's own warranty, use Siemens's service channel first — an independent repair may affect that cover. Once that warranty has ended, we repair it at your home, and our own 90-day warranty covers the parts we fit and the work we do.
Usually on the edge of the door or on the side of the tub, seen with the door open. Send a photo of that label on WhatsApp with what the dishwasher is doing and any code on the display — the model number tells us which parts fit before we arrive.
Our technicians travel to you across Dubai, Sharjah, Abu Dhabi and Ajman — at any hour, with no weekend, night or public holiday surcharge.
Find us on Google
Call or WhatsApp with the model and what it is doing. One AED 100 fee covers the inspection and the fixing; any parts are extra, and only with your approval.