Miele dishwashers
G-series integrated and freestanding models.
Common repairs- Waterproof system
- Drain pump
- Heater
We repair Miele dishwashers at your home — G-series integrated and freestanding models. Call now and an independent technician comes to you, usually the same day.
Independent technicians, at your home, 24 hours a day
AED 100 inspection and fixing fee · parts extra, only with your approval · prices exclude 5% VAT
At a glance
Don’t wait. Schedule a priority inspection today.
AED 100 inspection and fixing fee · parts only with your approval · prices exclude 5% VAT
Prefer to call? +971 58 869 5211
Independent service provider. Unitech Maintenance is an independent repair company. We are not an authorised service agent of, and are not affiliated with or endorsed by, Miele. The name “Miele” and other manufacturer names on this page are trademarks of their respective owners and are used only to identify the equipment we repair.
Talk to a technician now
+971 58 869 5211Tell us the model and what your Miele dishwasher is doing. One AED 100 fee covers the inspection and the fixing; parts only with your approval.
Every fault is tested and confirmed before any part is replaced, and you approve the price before work starts.
G-series integrated and freestanding models.
Common repairsWhat owners tell us when they call about a dishwasher. Any of them, on any Miele model, starts with a test at your home.
These are codes we are called out for on Miele appliances in the UAE. A code narrows the search — it does not name the broken part on its own, which is why every job starts with a test rather than a guess.
What it means
Drainage fault. Waste water is not being cleared within the time the programme expects, so the cycle stops with water standing in the bottom of the wash cabinet. Usual causes are a blocked filter combination, an obstructed or jammed drain pump impeller, debris or deposits in the drain hose, a kinked drain hose, or a fault at the non-return valve or the sink waste connection.
Usually
Blocked filter or drain pump impeller, a kinked or badly routed drain hose, or a partially blocked household waste connection.
What it means
Waterproof System activated. The float in the base tray under the machine has lifted, so the control reads it as water where there should be none and locks the programme out - only a small amount is needed to trigger it. The leak commonly comes from the pump housing, a loose hose clamp, a perished door seal at the lower corners, or heavy over-sudsing; a failed float switch or damaged float wiring can also trigger F70 with no actual leak. Miele's own guidance is to switch off, disconnect from the electricity supply and call a technician.
Usually
A genuine leak from a hose joint, door seal, sump or tank, or a float switch that has stuck up after an earlier small leak. Miele's own guidance is to shut the tap and isolate the machine from the socket before anything else.
Seeing one of these codes? Call with the code and the model number from the rating plate, and we will tell you the likely cause and what happens next.
Call now · +971 58 869 5211Dishwashers are the G-series, with G5000 machines on UAE retail shelves and G7000-generation units in Miele's own support material.
Miele parts in the UAE are generally supplied through the brand's own regional channel rather than the open aftermarket, which realistically affects how quickly a component arrives. We confirm the actual wait with you at diagnosis rather than promising a figure we cannot hold to.
We confirm the exact part, its availability and the expected wait with you before the repair is approved. Where an original part is discontinued or slow to source, we say so and tell you what the alternative is before anything is fitted — including whether it is an OEM part or a high-grade equivalent.
Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval.
All prices exclude 5% VAT. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing.
The same method on every Miele dishwasher — test first, agree any parts, repair, then the warranty.
Call or WhatsApp with the model number and what the appliance is doing. An error code helps.
The technician tests and confirms the fault before anything is replaced. No guessing.
The AED 100 fee covers the inspection and the fixing. Any part is priced first and fitted only with your approval.
We run the appliance in front of you, then the repair carries a 90-day warranty.
Straight answers to what people ask us about Miele dishwashers.
Treat it as urgent. F70 means the leak-protection system has tripped, which the machine reads as water somewhere it should not be. Close the water tap to the machine, unplug it, and do not keep resetting it and trying again - if there is a live leak, restarting simply lets more water out. Call us and we will trace where it is coming from.
The ones we are called out for most are F11 and F70, and each is explained on this page. A code narrows the search but does not name the broken part on its own, so every job starts with a test rather than a guess.
Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing. All prices exclude 5% VAT.
If it is still inside Miele's own warranty, use Miele's service channel first — an independent repair may affect that cover. Once that warranty has ended, we repair it at your home, and our own 90-day warranty covers the parts we fit and the work we do.
Usually on the edge of the door or on the side of the tub, seen with the door open. Send a photo of that label on WhatsApp with what the dishwasher is doing and any code on the display — the model number tells us which parts fit before we arrive.
Our technicians travel to you across Dubai, Sharjah, Abu Dhabi and Ajman — at any hour, with no weekend, night or public holiday surcharge.
Find us on Google
Call or WhatsApp with the model and what it is doing. One AED 100 fee covers the inspection and the fixing; any parts are extra, and only with your approval.