AEG dishwashers
Built-in and integrated AEG dishwashers, including leak-protection trips.
Common repairs- Drain pump
- Aqua-control leak tray
- Heating element
We repair AEG dishwashers at your home — Built-in and integrated AEG dishwashers, including leak-protection trips. Call now and an independent technician comes to you, usually the same day.
Independent technicians, at your home, 24 hours a day
AED 100 inspection and fixing fee · parts extra, only with your approval · prices exclude 5% VAT
At a glance
Don’t wait. Schedule a priority inspection today.
AED 100 inspection and fixing fee · parts only with your approval · prices exclude 5% VAT
Prefer to call? +971 58 869 5211
Independent service provider. Unitech Maintenance is an independent repair company. We are not an authorised service agent of, and are not affiliated with or endorsed by, AEG. The name “AEG” and other manufacturer names on this page are trademarks of their respective owners and are used only to identify the equipment we repair.
Talk to a technician now
+971 58 869 5211Tell us the model and what your AEG dishwasher is doing. One AED 100 fee covers the inspection and the fixing; parts only with your approval.
Every fault is tested and confirmed before any part is replaced, and you approve the price before work starts.
Built-in and integrated AEG dishwashers, including leak-protection trips.
Common repairsWhat owners tell us when they call about a dishwasher. Any of them, on any AEG model, starts with a test at your home.
These are codes we are called out for on AEG appliances in the UAE. A code narrows the search — it does not name the broken part on its own, which is why every job starts with a test rather than a guess.
What it means
Water inlet fault. The dishwasher did not take in the water it needs for the wash. AEG lists i11 and, on some models, AL5 or C1 as the same fault, signalled on display-free models by one beep or one flash of the warning light.
Usually
The supply tap under the sink closed or only cracked open, a kinked inlet hose, a clogged mesh filter in the hose union, or weak incoming water pressure. On aqua-stop hoses the safety valve may have tripped.
What it means
Draining fault. Waste water is not leaving the machine within the expected time, typically leaving standing water in the base of the tub. AEG lists C2, F2 and AL6 as the same fault, signalled on display-free models by two beeps or two flashes.
Usually
Food debris in the coarse and fine filters at the bottom of the tub, a blocked or badly routed drain hose, a blocked sink-trap spigot, or a drain pump that has jammed or failed.
What it means
Water leak detected. AEG states this may indicate an internal leak caused by water collecting in the base of the appliance, and the machine stops the cycle. AEG's own guidance is to close the water tap, check installation, levelling, loading, filters, spray arms, sump and door seal, and to arrange a repair if the code returns.
Usually
An internal leak — a perished door seal, a split spray-arm feed or hose, a leaking sump or pump seal, or overfilling caused by a faulty pressure sensor. Excess detergent causing heavy foaming can also trip it.
Seeing one of these codes? Call with the code and the model number from the rating plate, and we will tell you the likely cause and what happens next.
Call now · +971 58 869 5211Because AEG's UAE line-up is listed by model code rather than series, the code on the rating plate is the only reliable way to order the right part.
We confirm the exact part, its availability and the expected wait with you before the repair is approved. Where an original part is discontinued or slow to source, we say so and tell you what the alternative is before anything is fitted — including whether it is an OEM part or a high-grade equivalent.
Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval.
All prices exclude 5% VAT. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing.
The same method on every AEG dishwasher — test first, agree any parts, repair, then the warranty.
Call or WhatsApp with the model number and what the appliance is doing. An error code helps.
The technician tests and confirms the fault before anything is replaced. No guessing.
The AED 100 fee covers the inspection and the fixing. Any part is priced first and fitted only with your approval.
We run the appliance in front of you, then the repair carries a 90-day warranty.
Straight answers to what people ask us about AEG dishwashers.
No — stop using it. i30 means the machine has detected water sitting in its base tray and has shut itself down to avoid flooding your kitchen. Close the water tap feeding the dishwasher and leave it off. Something inside is leaking, commonly a door seal, a spray-arm feed, or a sump or pump seal, and it needs to be opened up and traced. Call us and we will attend; we are reachable 24/7.
The ones we are called out for most are i10, i20 and i30, and each is explained on this page. A code narrows the search but does not name the broken part on its own, so every job starts with a test rather than a guess.
Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing. All prices exclude 5% VAT.
If it is still inside AEG's own warranty, use AEG's service channel first — an independent repair may affect that cover. Once that warranty has ended, we repair it at your home, and our own 90-day warranty covers the parts we fit and the work we do.
Usually on the edge of the door or on the side of the tub, seen with the door open. Send a photo of that label on WhatsApp with what the dishwasher is doing and any code on the display — the model number tells us which parts fit before we arrive.
Our technicians travel to you across Dubai, Sharjah, Abu Dhabi and Ajman — at any hour, with no weekend, night or public holiday surcharge.
Find us on Google
Call or WhatsApp with the model and what it is doing. One AED 100 fee covers the inspection and the fixing; any parts are extra, and only with your approval.