Washing machines & dryers
TimeCare, PerfectCare and UltraCare laundry.
Common repairs- Inlet valve
- Drain pump
- Door lock
Swedish household appliances · Independent Electrolux specialists
Independent Electrolux Appliance Repairin Dubai, Sharjah, Abu Dhabi & Ajman
Electrolux shares its fault logic with AEG and Zanussi, which makes a code a reliable first clue. We carry that knowledge into every job and confirm the fault before quoting.
Direct line · open 24 hours+971 58 869 5211
At a glance
- AED 100 call-outWaived when you approve the repair
- 90-day warrantyOn parts and labour
- Same-day responseDubai · Sharjah · Abu Dhabi · Ajman
9Appliance types
4Product lines
5Fault codes documented
4Emirates covered
Independent service provider. Unitech Maintenance is an independent repair company. We are not an authorised service agent of, and are not affiliated with or endorsed by, Electrolux. The name “Electrolux” and other manufacturer names on this page are trademarks of their respective owners and are used only to identify the equipment we repair.
01Electrolux appliance lines4 lines
What we repair from Electrolux
Every fault is tested and confirmed before any part is replaced, and you approve the price before work starts.
Dishwashers
Freestanding and built-in dishwashers.
Common repairs- Drain path
- Leak tray
- Circulation pump
Fridges & freezers
Combination and side-by-side models.
Common repairs- Thermostat
- Defrost
- Fans
Codes we see
F1Thermostat problem — temperature not being held
Vacuums & water dispensers
Cordless vacuums and hot/cold dispensers.
Common repairs- Battery & charging
- Motor
- Cooling & heating
02Fault code index5 codes documented
Electrolux codes, explained
These are codes we are called out for on Electrolux appliances in the UAE. A code narrows the search — it does not name the broken part on its own, which is why every job starts with a test rather than a guess.
E10
What it means
The machine has not taken in water, or has not taken in enough water, within the time the cycle allows — so it stops rather than washing dry. Electrolux points first at the supply side: tap turned off or partly closed, a blocked filter in the inlet hose or at the valve, a kinked or trapped hose, or mains pressure outside the required 0.5–8 bar. Electrolux also notes a drain fault can present as E10 on some models. E11 and C1 are the same fault.
Usually
Closed or partly open tap, kinked or crushed inlet hose, a blocked inlet filter screen at the hose connection, low building water pressure (common in older Dubai and Sharjah blocks), or a failed inlet valve.
E20
What it means
The machine cannot pump the water out within the time the cycle allows, so it stops mid-programme with water still in the drum. Usual causes are a blocked drain pump filter, a kinked, blocked or badly routed drain hose, a blocked sink standpipe or siphon, or a failing drain pump. E21 and C2 are the same fault.
Usually
Blocked drain pump filter (coins, hair, lint), clogged or badly routed drain hose, blocked household waste pipe, or a seized or failed drain pump.
i20
What it means
The dishwasher cannot pump its water away, so it halts mid-cycle and normally leaves standing water in the base of the tub. Electrolux's checks: clogged interior filters and sump, a damaged, kinked or twisted drain hose, a drain hose run longer than 400 cm or an outlet point outside the 40–85 cm height range, and — on a newly installed or newly moved machine — the blanking plug still in place in the sink siphon trap. The same fault appears as C2, F2, AL6 or two beeps on models without a full display.
Usually
Clogged filter and sump, food debris in the drain pump impeller, kinked drain hose, or a blocked sink waste or air gap connection.
i30
What it means
The anti-flood system has detected water collecting in the base of the machine and has shut the cycle down to stop it flooding the kitchen. Turn the water supply off first. It is not always a real leak: Electrolux names excess foam (too much detergent, or the wrong type) and a spray arm blocked by a large item such as an oven tray — which drives water onto one point of the door seal — as common triggers, alongside poor levelling and dirty or damaged filters, sump and door gasket. Electrolux's own first step is to switch off at the mains with the tap closed and leave it overnight so foam disperses, then retry. If it recurs, it needs a technician.
Usually
A leaking door seal, hose or spray arm joint, a cracked sump or tub, over-foaming from the wrong detergent, or a float switch stuck up after a previous spill.
F1
What it means
F1 (and F2) on the display indicate a thermostat problem — the appliance cannot reliably sense and hold its set temperature. Unlike most laundry and dishwasher codes there is no user fix: Electrolux's stated advice is to request a service engineer and to quote the code when booking. Applies to Electrolux fridge freezers fitted with a digital display.
Usually
Failed or out-of-tolerance thermostat/temperature sensor, a damaged sensor lead, or a control board that has lost the sensor signal.
03Book a visitAED 100 call-out
Booking an independent Electrolux repair
We are an independent UAE repair company working across Dubai, Sharjah, Abu Dhabi and Ajman, 24 hours a day. Every repair carries a 90-day warranty on parts and labour, and the call-out is waived when you approve the work. If your appliance is still under Electrolux warranty, use Electrolux's own service channel first — an independent repair may affect that cover.
Visit & diagnosisWaived when you approve the repair
AED 100Fixed quote before workParts quoted separately, approved by you
AlwaysNights, weekends, holidaysNo out-of-hours surcharge
No extra04On the job2 photographs
Know the machine, then fix it
Electrolux model families we see in UAE homes
Electrolux sells in the UAE under named series: UltimateCare washing machines, PerfectCare and UltimateCare dryers including heat-pump models, and UltimateTaste cooking.
Electrolux parts in the UAE
Electrolux UAE listings quote a full model code with a regional suffix, and that suffix changes which parts fit.
We confirm the exact part, its availability and the expected wait with you before the repair is approved. Where an original part is discontinued or slow to source, we say so and tell you what the alternative is before anything is fitted — including whether it is an OEM part or a high-grade equivalent.
Photographs taken by our technicians on real jobs in UAE homes. Never stock images.
05Rate schedule8 published rates
What a Electrolux repair costs
Starting prices for the repairs we do most on Electrolux appliances. The final figure is confirmed on site after diagnosis, and nothing starts until you approve it.
- Call-out
- AED 100
- Published rates
- 8
- VAT
- excl. 5%
| Service | Price |
|---|---|
| On-site diagnosis / call-outWaived when you approve the repair | AED 100 |
| Washing machine — drain pump | fromAED 250 |
| Washing machine — door lock / PCB | fromAED 350 |
| Refrigerator — thermostat / sensor | fromAED 280 |
| Refrigerator — gas recharge | fromAED 400 |
| Dishwasher — inlet valve / drain pump | fromAED 260 |
| Oven / cooking range — element or thermostat | fromAED 220 |
| Dryer — heating element / belt | fromAED 250 |
- Final price confirmed on site after diagnosis. No work starts without your approval.
- All prices exclude 5% VAT.
- Spare parts are quoted separately and approved before work begins. We use OEM parts where available, and tell you before fitting a high-grade equivalent.
- 90-day warranty on parts and labour.
- Pay by cash, card or bank transfer.
06How a repair works4 steps
Four steps, every time
The same method on every Electrolux job — test first, price second, repair third, then the warranty.
- 01
Tell us the fault
Call or WhatsApp with the model number and what the appliance is doing. An error code helps.
- 02
Diagnosis at home
The technician tests and confirms the fault before anything is replaced. No guessing.
- 03
Price, then repair
You get a fixed price and approve it before work starts. Parts are quoted separately.
- 04
Tested, then covered
We run the appliance in front of you, then the repair carries a 90-day warranty.
07Questions9 questions answered
Electrolux repair questions
Straight answers to what people ask us most about Electrolux appliances.
- Questions answered
- 9
- Appliance types
- 9
- Codes documented
- 5
My Electrolux washing machine is showing E10 - what does it mean and can I clear it myself?
E10 means the machine did not receive the water it was waiting for. Before calling anyone, check the tap is fully open, the inlet hose is not kinked behind the machine, and the small filter screen where the hose meets the tap is not silted up - hard water in the UAE blocks these quickly. If the tap is open and pressure elsewhere in the flat is fine, the inlet valve or the level sensing is likely at fault and needs a technician. We are open 24/7 and cover Dubai, Sharjah, Ajman and Abu Dhabi.
My Electrolux washer shows E20 and there is water sitting in the drum. What now?
E20 means the water is not draining in the time the programme allows. The most common cause is the drain pump filter, usually behind a small flap at the bottom front of the machine - coins, hairpins and lint collect there. Put a towel and a shallow tray down first, because it will release water. If the filter is clear and the drain hose is not kinked or pushed too far into the waste pipe, the pump itself or the household waste line is the problem and should be looked at properly.
Are you connected to Electrolux in any way?
No. Unitech Maintenance is an independent appliance repair company. We have no affiliation with Electrolux or its manufacturer network. If your appliance is still inside the manufacturer's own warranty, you should use the manufacturer's own support route first, because an independent repair can affect that cover.
My Electrolux dishwasher stops mid-cycle with water in the bottom - is that i20?
That pattern usually is i20, which means the machine could not pump its water away. Start with the filter assembly in the base of the tub - lift it out and rinse off the food debris, and check the spray arms are not blocked. Also check the sink waste the dishwasher drains into. If the tub still holds water after that, the drain pump or the hose run needs attention. If it shows i30 instead, stop using it - that is the flood protection reacting to water in the base tray, and it should be diagnosed before you run another cycle.
My Electrolux fridge is not holding temperature in the Dubai summer. Is it the gas?
Not necessarily, and it is worth resisting anyone who says that before looking. Poor cooling in July and August is very often airflow rather than refrigerant - a frosted evaporator, a failed fan, condenser coils packed with dust, or a door seal that no longer closes cleanly in a hot kitchen. If the display is showing F1 or F2, Electrolux describes that as a thermostat or temperature-sensing fault, which is a component-level repair rather than a gas job. A technician should confirm the cause before any sealed-system work is discussed.
Do you charge a call-out fee to look at an Electrolux appliance?
The call-out charge is waived when you approve the repair. If you decide not to go ahead after the diagnosis, the call-out applies. The technician tells you the cost before any work starts.
Is there any warranty on the repair?
Yes - 90 days on both parts and labour. If the same fault returns within that period we come back and put it right.
Which areas do you cover, and can you come outside working hours?
We cover Dubai, Sharjah, Ajman and Abu Dhabi, and we operate 24/7. Late-evening and weekend visits are normal for us, which helps if the machine failed at the worst possible moment and you cannot take time off work.
My Electrolux washing machine will not open and shows E40. Is the door broken?
E40 means the control cannot confirm the door is closed and locked. Sometimes it is as simple as a garment caught in the seal stopping the door from seating. If the door is genuinely shut and the code persists, the interlock or its wiring is the usual culprit. Do not force the door - on a front-loader the interlock keeps it shut for a reason, and forcing it turns a small part into a bigger repair.
Call-out fees, VAT and what each repair typically costs are set out on our pricing page. What the 90-day cover includes, and what it does not, is on warranty terms.
08Coverage4 emirates · 79 areas
Four emirates, one number
Our technicians travel to you across Dubai, Sharjah, Abu Dhabi and Ajman — at any hour, with no weekend, night or public holiday surcharge.
Registered office: No. 3, Masfout, Ajman
Dubai
Dubai MarinaJLTJBRDowntown DubaiBusiness BayDeiraBur DubaiAl BarshaJumeirahUmm SuqeimMirdifAl Qusais+16 more
Sharjah
Al NahdaAl MajazAl KhanAl QasimiaAl TaawunMuweilahRollaAl YarmookAbu ShagaraAl JazzatUniversity CityAl Zahia+6 more
Abu Dhabi
Khalifa CityMohammed Bin Zayed CityAl Reem IslandYas IslandSaadiyat IslandAl Raha BeachAl BateenAl KhalidiyahAl MushrifAl NahyanAl MuroorAl Shamkha+6 more
Ajman
Al NuaimiyaAl RashidiyaAl JurfAjman CornicheAl RumailahAl MowaihatEmirates CityAjman DowntownAl BustanAl HamidiyahGarden CityAl Zahra+3 more
Find us on Google
Unitech Home Building Maintenance L.L.C
- No. 3, Masfout, Ajman
- Serving Dubai, Sharjah, Abu Dhabi and Ajman
- Open 24 hours, 7 days a week
- +971 58 869 5211
Open 24 hours, 7 days a week
Is your Electrolux playing up?
Call or WhatsApp with the appliance, the model and what it is doing. We will tell you what happens next — and what it costs — before anyone comes out.