Miele washing machines
W1 and earlier Miele washers.
Common repairs- Drive motor & tacho
- Drain pump
- Door lock
We repair Miele washing machines and dryers at your home, including washing machines and tumble dryers. Call now and an independent technician comes to you, usually the same day.
Independent technicians, at your home, 24 hours a day
AED 100 inspection and fixing fee · parts extra, only with your approval · prices exclude 5% VAT
At a glance
Don’t wait. Schedule a priority inspection today.
AED 100 inspection and fixing fee · parts only with your approval · prices exclude 5% VAT
Prefer to call? +971 58 869 5211
Independent service provider. Unitech Maintenance is an independent repair company. We are not an authorised service agent of, and are not affiliated with or endorsed by, Miele. The name “Miele” and other manufacturer names on this page are trademarks of their respective owners and are used only to identify the equipment we repair.
Talk to a technician now
+971 58 869 5211Tell us the model and what your Miele washing machine is doing. One AED 100 fee covers the inspection and the fixing; parts only with your approval.
Every fault is tested and confirmed before any part is replaced, and you approve the price before work starts.
W1 and earlier Miele washers.
Common repairsT1 heat-pump dryers.
Common repairsWhat owners tell us when they call about a washing machine. Any of them, on any Miele model, starts with a test at your home.
These are codes we are called out for on Miele appliances in the UAE. A code narrows the search — it does not name the broken part on its own, which is why every job starts with a test rather than a guess.
What it means
Speed sensor (tachogenerator) fault. The tacho on the drive motor is no longer sending a usable drum-speed signal, so the control unit cannot verify the drum is turning at the commanded speed and stops the programme. Typical causes are a failed tachogenerator, worn motor carbon brushes, a broken or unplugged tacho lead, or a faulty motor control board. Diagnosis requires a technician - a healthy tacho reads roughly a couple of volts AC when the drum is turned by hand.
Usually
Faulty speed sensor (tachogenerator) or its wiring loom, worn motor carbon brushes on brush-type motors, or a motor that has stalled under load.
What it means
Maximum drying time exceeded. On a residual-moisture (sensor-controlled) programme the load still had not reached the target dryness after the 180-minute maximum the dryer allows, so it ends the programme and reports the fault rather than running on indefinitely. Miele's own first checks are to reduce the load size to within the maximum for that programme, spin the wash at a higher speed in the washing machine first, and clean the fluff filters (a wet or clogged filter chokes airflow). If it recurs after that, it needs a technician - typically the moisture sensors, the condenser or heat-pump air path, or a restricted duct.
Usually
Restricted airflow from clogged lint filters or a blocked condenser or heat-exchanger, a failing fan, or moisture sensors coated in detergent residue and misreading the load.
Seeing one of these codes? Call with the code and the model number from the rating plate, and we will tell you the likely cause and what happens next.
Call now · +971 58 869 5211Miele's UAE laundry range is the W1 front-loader family, listed locally as WWD and WWG models.
Miele parts in the UAE are generally supplied through the brand's own regional channel rather than the open aftermarket, which realistically affects how quickly a component arrives. We confirm the actual wait with you at diagnosis rather than promising a figure we cannot hold to.
We confirm the exact part, its availability and the expected wait with you before the repair is approved. Where an original part is discontinued or slow to source, we say so and tell you what the alternative is before anything is fitted — including whether it is an OEM part or a high-grade equivalent.
Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval.
All prices exclude 5% VAT. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing.
The same method on every Miele washing machine — test first, agree any parts, repair, then the warranty.
Call or WhatsApp with the model number and what the appliance is doing. An error code helps.
The technician tests and confirms the fault before anything is replaced. No guessing.
The AED 100 fee covers the inspection and the fixing. Any part is priced first and fitted only with your approval.
We run the appliance in front of you, then the repair carries a 90-day warranty.
Straight answers to what people ask us about Miele washing machines and dryers.
Switch the machine off at the wall, note the exact code and let the drum cool before you open it. An F code is the machine telling you which system it lost confidence in, not a diagnosis on its own - the same code can come from a blocked filter or a failed component. Call us with the code and the model number and we will tell you what is likely involved. We are an independent repair company, reachable 24/7, and we cover Dubai, Sharjah, Ajman and Abu Dhabi.
Often yes. If the dryer ends the programme early or reports a drying fault, the usual cause is airflow rather than a dead machine - clogged lint filters, a blocked condenser or heat exchanger, or a fan that is no longer moving enough air. It is worth cleaning the filters and condenser first. If it still will not dry, the moisture sensors or the heating circuit need checking.
The ones we are called out for most are F53 and F55, and each is explained on this page. A code narrows the search but does not name the broken part on its own, so every job starts with a test rather than a guess.
Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing. All prices exclude 5% VAT.
If it is still inside Miele's own warranty, use Miele's service channel first — an independent repair may affect that cover. Once that warranty has ended, we repair it at your home, and our own 90-day warranty covers the parts we fit and the work we do.
Usually on a sticker inside the door rim or on the back panel. Send a photo of that label on WhatsApp with what the washing machine is doing and any code on the display — the model number tells us which parts fit before we arrive.
Our technicians travel to you across Dubai, Sharjah, Abu Dhabi and Ajman — at any hour, with no weekend, night or public holiday surcharge.
Find us on Google
Call or WhatsApp with the model and what it is doing. One AED 100 fee covers the inspection and the fixing; any parts are extra, and only with your approval.