Zanussi dishwashers
AirDry, slimline and built-in models.
Common repairs- Drain path
- Leak protection
- Spray arms
We repair Zanussi dishwashers at your home — AirDry, slimline and built-in models. Call now and an independent technician comes to you, usually the same day.
Independent technicians, at your home, 24 hours a day
AED 100 inspection and fixing fee · parts extra, only with your approval · prices exclude 5% VAT

At a glance
Don’t wait. Schedule a priority inspection today.
AED 100 inspection and fixing fee · parts only with your approval · prices exclude 5% VAT
Prefer to call? +971 58 869 5211
Independent service provider. Unitech Maintenance is an independent repair company. We are not an authorised service agent of, and are not affiliated with or endorsed by, Zanussi. The name “Zanussi” and other manufacturer names on this page are trademarks of their respective owners and are used only to identify the equipment we repair.
Talk to a technician now
+971 58 869 5211Tell us the model and what your Zanussi dishwasher is doing. One AED 100 fee covers the inspection and the fixing; parts only with your approval.
Every fault is tested and confirmed before any part is replaced, and you approve the price before work starts.
AirDry, slimline and built-in models.
Common repairsWhat owners tell us when they call about a dishwasher. Any of them, on any Zanussi model, starts with a test at your home.
These are codes we are called out for on Zanussi appliances in the UAE. A code narrows the search — it does not name the broken part on its own, which is why every job starts with a test rather than a guess.
What it means
The dishwasher could not pump out its water within the expected time, so it stops the programme and typically leaves standing water in the tub base. Usually a blocked filter or sump, a clogged or kinked drain hose, a blocked waste connection or sink spigot, or a failed drain pump.
Usually
Food debris in the sump or filter basket, a blocked drain hose, a kitchen waste connection that was never knocked through during installation, a clogged sink trap, or a failing drain pump. On some models the fault also shows as beeps or flashes rather than a display code.
What it means
The anti-flood system has detected water in the base tray, so the machine stops running programmes and the drain pump runs continuously — often audible as a constant hum even when the machine appears off. Caused by a genuine internal leak, or by over-foaming from incorrect detergent, or by misloading that directs spray into a door seal. Emptying the base tray (tilting the appliance back over a towel) clears it; if it returns, the leak is real.
Usually
A leaking door seal, a split or perished hose inside the cabinet, a cracked sump or tub seam, or a loose inlet connection. Because it points at water escaping inside the machine, this one should be inspected rather than reset and ignored.
Seeing one of these codes? Call with the code and the model number from the rating plate, and we will tell you the likely cause and what happens next.
Call now · +971 58 869 5211Model codes begin with Z and a letter group identifying the appliance: ZW laundry, ZD dishwashers, ZO ovens, ZG gas hobs, ZR refrigeration.
Zanussi rating plates carry a PNC product number alongside the model code, and it is the PNC a technician actually needs to order the correct part.
We confirm the exact part, its availability and the expected wait with you before the repair is approved. Where an original part is discontinued or slow to source, we say so and tell you what the alternative is before anything is fitted — including whether it is an OEM part or a high-grade equivalent.
Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval.
All prices exclude 5% VAT. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing.
The same method on every Zanussi dishwasher — test first, agree any parts, repair, then the warranty.
Call or WhatsApp with the model number and what the appliance is doing. An error code helps.
The technician tests and confirms the fault before anything is replaced. No guessing.
The AED 100 fee covers the inspection and the fixing. Any part is priced first and fitted only with your approval.
We run the appliance in front of you, then the repair carries a 90-day warranty.
Straight answers to what people ask us about Zanussi dishwashers.
No — stop using it and unplug it. i30 means the anti-flood system has found water in the base tray of the machine, and the humming is the drain pump running continuously to try to clear it. That points to water escaping somewhere inside the cabinet: a door seal, an internal hose, or the sump. Leaving it running risks water reaching the kitchen floor and the cabinetry around it. Turn off the water supply at the isolating valve under the sink and book an inspection.
The ones we are called out for most are i20 and i30, and each is explained on this page. A code narrows the search but does not name the broken part on its own, so every job starts with a test rather than a guess.
Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing. All prices exclude 5% VAT.
If it is still inside Zanussi's own warranty, use Zanussi's service channel first — an independent repair may affect that cover. Once that warranty has ended, we repair it at your home, and our own 90-day warranty covers the parts we fit and the work we do.
Usually on the edge of the door or on the side of the tub, seen with the door open. Send a photo of that label on WhatsApp with what the dishwasher is doing and any code on the display — the model number tells us which parts fit before we arrive.
Our technicians travel to you across Dubai, Sharjah, Abu Dhabi and Ajman — at any hour, with no weekend, night or public holiday surcharge.
Find us on Google
Call or WhatsApp with the model and what it is doing. One AED 100 fee covers the inspection and the fixing; any parts are extra, and only with your approval.