We repair Teka dishwashers at your home across Dubai, Sharjah, Abu Dhabi and Ajman. Call now and an independent technician comes to you, usually the same day.
Independent technicians, at your home, 24 hours a day
AED 100 inspection and fixing fee · parts extra, only with your approval · prices exclude 5% VAT
At a glance
Don’t wait. Schedule a priority inspection today.
AED 100 inspection and fixing fee · parts only with your approval · prices exclude 5% VAT
Prefer to call? +971 58 869 5211
Independent service provider. Unitech Maintenance is an independent repair company. We are not an authorised service agent of, and are not affiliated with or endorsed by, Teka. The name “Teka” and other manufacturer names on this page are trademarks of their respective owners and are used only to identify the equipment we repair.
Talk to a technician now
+971 58 869 5211Tell us the model and what your Teka dishwasher is doing. One AED 100 fee covers the inspection and the fixing; parts only with your approval.
Every fault is tested and confirmed before any part is replaced, and you approve the price before work starts.
What owners tell us when they call about a dishwasher. Any of them, on any Teka model, starts with a test at your home.
These are codes we are called out for on Teka appliances in the UAE. A code narrows the search — it does not name the broken part on its own, which is why every job starts with a test rather than a guess.
What it means
Heating fault — the wash water did not reach the temperature the selected programme requires. Cause is the heating element or its circuit (element, thermostat/NTC, or the relay driving it); on the DW8/DW9 S series the machine ends the running programme when this trips.
Usually
Failed heating element, open-circuit thermostat or NTC temperature sensor, scale build-up on the element (very common on hard UAE water), or a control board relay that is no longer switching the heater.
What it means
Diverter (distributary) valve fault — the valve that alternates water between the upper and lower spray arms is not reaching or reporting its correct position. Manual causes: open circuit in the valve wiring, or a broken/jammed diverter valve. On the DW8/DW9 S series this ends the running programme.
Usually
Broken or jammed diverter valve, failed valve motor, or an open circuit in its wiring loom. Symptom is usually poor wash results on one rack while the other cleans normally.
Seeing one of these codes? Call with the code and the model number from the rating plate, and we will tell you the likely cause and what happens next.
Call now · +971 58 869 5211Teka's UAE site lists built-in ovens in 60cm multifunction, 45cm compact and 90cm large-capacity formats, alongside steam, conventional and gas ovens, plus hobs, cooker hoods and dishwashers.
Teka dishwasher fault codes differ between platforms, so the same code can mean different things on two Teka machines. The model number decides which reading applies and which parts fit.
We confirm the exact part, its availability and the expected wait with you before the repair is approved. Where an original part is discontinued or slow to source, we say so and tell you what the alternative is before anything is fitted — including whether it is an OEM part or a high-grade equivalent.
Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval.
All prices exclude 5% VAT. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing.
The same method on every Teka dishwasher — test first, agree any parts, repair, then the warranty.
Call or WhatsApp with the model number and what the appliance is doing. An error code helps.
The technician tests and confirms the fault before anything is replaced. No guessing.
The AED 100 fee covers the inspection and the fixing. Any part is priced first and fitted only with your approval.
We run the appliance in front of you, then the repair carries a 90-day warranty.
Straight answers to what people ask us about Teka dishwashers.
E4 means the machine has detected water where it should not be and has flagged an overflow or leak. Turn the dishwasher off at the socket and close the water inlet tap under the sink before anything else, then mop up any standing water on the floor. Do not keep restarting it - if the leak is coming from a split hose, a failed door seal or a cracked sump, running it again just puts more water into your kitchen. We are open 24/7 and cover Dubai, Sharjah, Ajman and Abu Dhabi, so a leaking dishwasher does not have to wait until morning.
Usually yes, and on many Teka models it will eventually show as E3 - the wash water never reached the temperature the programme asked for. The usual causes are a failed heating element, a temperature sensor or thermostat that has gone open circuit, heavy scale on the element from hard UAE water, or a control board relay that is no longer switching the heater on. It is a repairable fault on almost every model. Our technician confirms which component has failed and quotes you before doing the work, and the repair carries a 90-day warranty on both parts and labour.
Not necessarily. E1 means the dishwasher waited too long for water and stopped rather than running dry, so the first things to check are the simple ones: is the inlet tap fully open, is the fill hose kinked behind the machine, and is water pressure normal at the kitchen sink. Low or fluctuating supply pressure is genuinely common in older buildings and on tank-fed systems here. If the supply is fine, the fault is usually a blocked inlet filter screen or a failed inlet valve, both of which are straightforward for a technician to replace.
The ones we are called out for most are E3 and E8, and each is explained on this page. A code narrows the search but does not name the broken part on its own, so every job starts with a test rather than a guess.
Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing. All prices exclude 5% VAT.
If it is still inside Teka's own warranty, use Teka's service channel first — an independent repair may affect that cover. Once that warranty has ended, we repair it at your home, and our own 90-day warranty covers the parts we fit and the work we do.
Usually on the edge of the door or on the side of the tub, seen with the door open. Send a photo of that label on WhatsApp with what the dishwasher is doing and any code on the display — the model number tells us which parts fit before we arrive.
Our technicians travel to you across Dubai, Sharjah, Abu Dhabi and Ajman — at any hour, with no weekend, night or public holiday surcharge.
Find us on Google
Call or WhatsApp with the model and what it is doing. One AED 100 fee covers the inspection and the fixing; any parts are extra, and only with your approval.
