Teka Specialist Cooker & Oven Repair Service in Dubai, Sharjah, Abu Dhabi and Ajman

E2 means the hob's electronics have got too hot and the hob has shut the zones down to protect itself. Very often this is an installation and ventilation problem rather than a broken hob - a sealed cabinet with no air gap, a drawer or built-in oven fitted too close underneath, or a blocked ventilation slot. UAE kitchen temperatures in summer make it worse. It can also be a clogged or failed cooling fan. A technician checks the airflow and the fan before condemning any electronics, because the fix is frequently much cheaper than people expect.

No. On Teka hoods that F is a filter saturation reminder, not a fault code - it is telling you the grease filters have hit their cleaning interval. Take the metal grease filters out, wash them, refit them dry, then reset the indicator using the button sequence for your model. If the F keeps returning straight after a reset, or the hood is noisy, vibrating or barely pulling air, then something else is going on - typically the motor, capacitor or the control board - and that is worth having looked at.

Yes. Teka does not publish a general error-code table for its built-in ovens the way it does for some other appliances, so oven faults are diagnosed by symptom and by electrical testing rather than by reading a code off the display. No heat at all, one element working and not the other, a fan that runs but does not heat, wildly wrong temperatures, a door lock stuck after a cleaning cycle, or a clock display that flashes and blocks the oven from starting - all of those point to specific components a technician can test on site.

U400 means the hob has been connected to the wrong supply configuration - the controls shut down about a second after switching on and a continuous tone sounds. It is almost always a wiring error at the terminal block, such as the wrong live and neutral arrangement or a bridging link left in or taken out incorrectly during installation. It is not a sign that the hob itself has failed. Do not keep power-cycling it; get the connection checked and corrected properly.

What the 90-day cover includes, and what it does not, is set out in our warranty terms.

Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing. All prices exclude 5% VAT.

If it is still inside Teka's own warranty, use Teka's service channel first — an independent repair may affect that cover. Once that warranty has ended, we repair it at your home, and our own 90-day warranty covers the parts we fit and the work we do.

Usually on the frame around the oven door, seen with the door open, or under the hob. Send a photo of that label on WhatsApp with what the oven is doing — the model number tells us which parts fit before we arrive.