Viking professional ranges
Sealed-burner gas and dual-fuel ranges with warming drawers.
Common repairs- High-output burners
- Ignition
- Warming drawer
We repair Viking cookers and ovens at your home, including professional ranges, ovens and cooktops. Call now and an independent technician comes to you, usually the same day.
Independent technicians, at your home, 24 hours a day
AED 100 inspection and fixing fee · parts extra, only with your approval · prices exclude 5% VAT

At a glance
Don’t wait. Schedule a priority inspection today.
AED 100 inspection and fixing fee · parts only with your approval · prices exclude 5% VAT
Prefer to call? +971 58 869 5211
Independent service provider. Unitech Maintenance is an independent repair company. We are not an authorised service agent of, and are not affiliated with or endorsed by, Viking. The name “Viking” and other manufacturer names on this page are trademarks of their respective owners and are used only to identify the equipment we repair.
Talk to a technician now
+971 58 869 5211Tell us the model and what your Viking oven is doing. One AED 100 fee covers the inspection and the fixing; parts only with your approval.
Every fault is tested and confirmed before any part is replaced, and you approve the price before work starts.
Sealed-burner gas and dual-fuel ranges with warming drawers.
Common repairsRange and wall ovens with convection.
Common repairsRangetops and cooktops.
Common repairsWhat owners tell us when they call about an oven. Any of them, on any Viking model, starts with a test at your home.
These are codes we are called out for on Viking appliances in the UAE. A code narrows the search — it does not name the broken part on its own, which is why every job starts with a test rather than a guess.
What it means
The control cannot confirm the oven door latch is in the position it expects. It most often appears around a self-clean cycle, where the door has to lock before the cycle will run and unlock once the oven has cooled.
Usually
A latch motor that is not completing its travel, a failed latch switch, or wiring to the latch assembly. On some models a related F1-2 points instead at the touch panel or its connection to the control board, so the two need separating on site.
What it means
The oven temperature sensor circuit reads open, so the control has lost its temperature reference and shuts the cycle down rather than heating blind.
Usually
A failed sensor, a broken or chafed sensor lead, or a connector that has worked loose behind the cavity. It is a cheap part but the wiring has to be tested first, because a good sensor on a broken lead reads exactly the same.
What it means
The door lock circuit has not done what the control expected, typically leaving the door locked after a self-clean cycle or refusing to lock before one starts.
Usually
The same latch assembly and switch that cause F1, seen from the other direction. A 30 to 60 second power cycle at the breaker sometimes releases a door left locked after cleaning; if it returns, the latch or its circuit needs attention.
Seeing one of these codes? Call with the code and the model number from the rating plate, and we will tell you the likely cause and what happens next.
Call now · +971 58 869 5211The professional-style ranges, wall ovens and cooktops are what we see here.
Its ranges run sealed burners rated far higher than a domestic hob — Viking quotes up to 23,000 BTU on its top burners — and its ovens use a powered convection system rather than a simple fan.
This is the most common Viking call we take, and it is usually the self-clean cycle rather than a broken oven.
On a professional-style gas range that isolates the fault to that burner position — the ignition electrode, the burner cap or the ports — rather than anything shared across the top.
Viking parts come through the regional distributor network rather than the general aftermarket, and professional-grade components cost more than mainstream equivalents. We confirm the part, the price and the expected wait with you before the repair is approved.
We confirm the exact part, its availability and the expected wait with you before the repair is approved. Where an original part is discontinued or slow to source, we say so and tell you what the alternative is before anything is fitted — including whether it is an OEM part or a high-grade equivalent.
Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval.
All prices exclude 5% VAT. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing.
The same method on every Viking oven — test first, agree any parts, repair, then the warranty.
Call or WhatsApp with the model number and what the appliance is doing. An error code helps.
The technician tests and confirms the fault before anything is replaced. No guessing.
The AED 100 fee covers the inspection and the fixing. Any part is priced first and fitted only with your approval.
We run the appliance in front of you, then the repair carries a 90-day warranty.
Straight answers to what people ask us about Viking cookers and ovens.
Let the oven cool completely first: the latch will not release while the cavity is still at clean-cycle temperature, and that is by design rather than a fault. If it is cool and still locked, switching the breaker off for 30 to 60 seconds and back on releases it on many models. If the door stays locked, or an F1 or F9 code is showing, stop there. Forcing a Viking latch is how a cheap switch becomes an expensive door assembly.
Yes. Viking sells into the UAE through a regional distributor and its professional-style ranges, wall ovens and cooktops are what we see in villas and high-end apartment kitchens here. We diagnose and repair them in place wherever possible, since pulling a fitted range out of a run of cabinetry is a last resort.
On a professional-style gas range that usually points at the ignition electrode or the burner cap for that one position rather than anything shared. Check the cap is seated squarely and completely dry after cleaning, and that the burner ports are clear. If it sparks but never lights, or lights and drops out when you release the knob, that is the ignition or flame-safety circuit and it needs a technician.
What the 90-day cover includes, and what it does not, is set out in our warranty terms.
The ones we are called out for most are F1, F3 and F9, and each is explained on this page. A code narrows the search but does not name the broken part on its own, so every job starts with a test rather than a guess.
Our inspection and fixing fee is AED 100. If any parts need replacing, they are charged on top — and only with your approval. If you decide not to go ahead after the inspection, the AED 100 is payable; if we cannot repair it at all, you pay nothing. All prices exclude 5% VAT.
If it is still inside Viking's own warranty, use Viking's service channel first — an independent repair may affect that cover. Once that warranty has ended, we repair it at your home, and our own 90-day warranty covers the parts we fit and the work we do.
Usually on the frame around the oven door, seen with the door open, or under the hob. Send a photo of that label on WhatsApp with what the oven is doing and any code on the display — the model number tells us which parts fit before we arrive.
Our technicians travel to you across Dubai, Sharjah, Abu Dhabi and Ajman — at any hour, with no weekend, night or public holiday surcharge.
Find us on Google
Call or WhatsApp with the model and what it is doing. One AED 100 fee covers the inspection and the fixing; any parts are extra, and only with your approval.